How To Install Corner Bead Metal

Over the last 50-plus years, Trim-Tex'due south vinyl corner beads have been known for but one chief installation technique: you hit them with spray adhesive and you staple them. But that'southward not the end of our story anymore. These days, there's a few different vinyl corner bead installation methods to choose from, depending on the solution you lot're using and the style you want to work. Are yous all virtually a speedy install, or do you prioritize strong corners above all? Whatever way you finish, nosotros got a solution to match it.

At that place are three tactics to consider when browsing through our drove of corner beads:spray-and-staple standard vinyl, Mud Set up and Fast Border®. These three techniques are not interchangeable, so exist sure to consult product instructions before you begin installation.

BENEFITS OF SPRAY-AND-STAPLE METHOD

The tried-and-true technique for outfitting your corners with toughened vinyl, just considering this method is conventional doesn't mean it's not highly effective. Spray-and-staple standard corner chaplet are a mainstay of drywall finishing for a adept reason — they're highly effective, stand up the test of time and don't have much of a learning curve.

The reward of using 847 Spray Agglutinative is that, past adhering the surface of the dewdrop straight to the drywall, you minimize slipping during expansion, versus using staples alone. Unlike many all-purpose spray adhesives on the marketplace, Trim-Tex'southward 847 Spray Adhesive is designed specifically for corner dewdrop. The adhesive is a web spray, which improves adhesion over standard mist sprays, and is colored to assistance easily identify it.

Combining this spray with staples along its mud leg gives the corner dewdrop a strong bond to the drywall that has been proven to concluding. If y'all want an installation method that'southward been time-tested and used by countless finishers beyond the world, look no farther.

INSTALLING STANDARD VINYL CORNER BEAD WITH SPRAY AND STAPLES

The spray-and-staple technique uses a spray adhesive — such equally the loftier-tack, pressure-sensitive Trim-Tex 847 discussed above — to attach the dewdrop before stapling it in place. Spray continuously from a altitude of half dozen to ten inches, being sure to keep the spray moving to avoid buildup on the drywall or bead surface. It doesn't have much spray to adhere the dewdrop, and too much can mean a longer await time for information technology to get tacky. (This quick-tip video demonstrates good technique with the spray can.)

Use 847 to the drywall, then to the bead before positioning the dewdrop into place. Press the corner bead in place using a pressuring tool or the handle of your taping pocketknife and finish by stapling every vi to viii inches — Trim-Tex recommends using half-inch staples.

BENEFITS OF MUD SET

Mud Set Beads are drywall corner chaplet made from high-bear on, rigid vinyl, featuring Trim-Tex'southward patented Mud Lock Engineering science.

Substantially, these Mud Locks are a serial of hooks along the bead's mud legs that grip into the joint compound to latch the dewdrop firmly onto the surface, near similar a bunch of super-powered hook-and-loop straps. Meanwhile, excess chemical compound is allowed to period through perforated mud holes (which are noticeably smaller than in standard vinyl chaplet for better adhesion). All of this is what gives Mud Fix Bead the strongest-possible bond to the drywall of whatever corner bead on the market. The strength of the bond between the mud legs, drywall compound and wall, combined with the elasticity properties of rigid vinyl, let the dewdrop to withstand a high degree of impact.

This strength isn't just for bear witness — information technology saves time and coin by reducing building maintenance costs, every bit well equally callbacks for the finisher. When a traditional corner gets dented, rusts or forms mold, it needs to be replaced, which is a time-consuming process. Mud Set Chaplet are strong plenty to withstand daily wearable-and-tear equally well as more intense impact.

If you've installed a metallic corner bead, a good whack will dent and deform its olfactory organ — this kind of damage is irreparable, and you'd take to replace any affected section, or rip the whole thing out and showtime once more. That same bear upon to a Mud Set Bead-protected corner, however, won't take any effect on its olfactory organ. If any damage does occur, information technology's well-nigh e'er going to be the drywall mud that fails, which yous can ready with a quick patch.

INSTALLING MUD SET BEADS

To install these Mud Fix Chaplet, run them through a 4-in-1 Mud Hopper, or employ a knife or compound applicator tube to apply the mud onto the corner straight. The hopper installs Mud Prepare xc Degree Bead, Mud Prepare Bullnose and Splayed Beads with ease to help minimize jobsite delays. With mud practical, printing the bead into place with a roller tool or the end of a taping knife.

Excess mud will squeeze through the perforations, which essentially levels out the bead from sitting too high on the corner; it too minimizes the amount of mud needed for the setting coat to form an incomparably strong bond between the bead and the drywall. Check for squareness of the bead, adjusting as needed. So just wipe the backlog mud clean and go alee and apply your fill up coat — the Mud Set method saves fourth dimension and labor by allowing the fill coat to be practical that same day.

BENEFITS OF FAST Edge®

The newest of our diverse vinyl corner dewdrop installation methods, you'll observe the difference with Fast Edge immediately — in that location's no mud holes and no mud bump. Instead, Fast Edge sports a vinyl core, covered in laminated paper. Information technology's perfect for finishers looking to up their games from paper-covered metal corner beads, or those only looking to finish the chore faster while using less materials.

In fact, Fast Border isn't just the quickest installation method of these three; it'south the quickest corner-bead solution you'll observe anywhere, in improver to saving you more mud than any other corner bead out there. How do we know? Nosotros put it to the test! Yous can bank check out the results of that head-to-head matchup here.

Fast Border besides utilizes the Mud Lock Technology we previously discussed for extra-force adhesion, only with no mud holes, backlog compound gets pushed out the back of the bead. The lack of a mud crash-land here is key to reducing the corporeality of mud used overall to install a Fast Border corner bead, and the vinyl core ways this is a long-lasting, super-durable solution for protecting your corners.

INSTALLING FAST Border CORNER BEADS

Since it also features Mud Lock Technology, the procedure for installing Fast Border is quite similar to that of Mud Ready Beads — no staples or sprays required.

Run a length of Fast Edge through a hopper, or use a pocketknife or compound applicator tube to apply mud directly on the drywall. Stick the bead in place on the corner, making sure your lines are straight, so we'd advise you use a Pro Series Quad Roller to utilise pressure evenly. Use a taping knife to whip downwards the excess mud that has been squeezed through the dorsum of the dewdrop'south mud legs.

You tin and so layer on your fill up coat of mud right away and, in one case that dries, your finish coat. Where standard vinyl will require effectually three coats of mud to finish, you're already prepared to move on to your next project with the Fast Border installation method. We named it Fast Edge for a good reason!

---

When it comes to comparison vinyl corner bead installation methods, we'll allow y'all be the judge — in that location's no wrong answers here! When you cull vinyl, you're choosing higher-quality materials, choosing impact resistance, choosing no rust and no mold.

The choice you lot make in installation method from in that location — between spray-and-staples standard vinyl, Mud Gear up Chaplet and Fast Edge — entirely depends on what's most important to yous, the finisher. Practise yous want the tried-and-true method, the strongest or the fastest?

All Trim-Tex corner chaplet fit into one of these three corner bead installation methods. Want to browse our collection of over 200 unlike looks and styles? Go ahead and download our digital catalog by hitting the button beneath!

Source: https://explore.trim-tex.com/content/comparing-corner-bead-installation-methods

Posted by: allenlated1977.blogspot.com

Share this post